Five Best Pool Lifts Of 2024

1. Aqua Creek Spa Lift Ultra

Aqua Creek Spa Lift Ultra is an ADA-compliant lift designed to provide access to both residential and commercial elevated pools and spas. It is designed to provide access to above-ground level spas and pools. It is constructed of quality stainless steel with a durable powder coat finish. The lift allows easy access to a personal backyard or commercial spa environment while enjoying the benefits of relaxation along with increased independence. Easy push-button hand control operation allows for 360 degrees powered rotation.

Aqua Creek Spa Lift Highlights

• Adjustable pull-out leg rest
• Flip-up armrests
• Water-resistant handle
• Clearances vary by wall height and width
• Durable powder coat finish

Features of the Spa and Pool Lift Ultra

• Aqua Creek Spa Lift Ultra is an ADA compliant
• Flip-up armrests available
• Benefits of relaxation along with increased independence
• Adjustable pull-out leg rest 360 degrees powered rotation
• Rechargeable battery with wall mount charger
• Water-resistant handset

Cautions while Using the Aqua Creek Spa Lift Ultra

• Use only freshwater to wash your lift. Do not wash with pool water
• Use only clean, soft, non-abrasive cloths to wipe down your lift
• Do not store lift in pump room or near chemicals
• Do not allow children to play on or around this lift
• Recharge the battery as often as possible
• The battery power unit is a sealed lead acid battery pack
• Frequent recharges will prolong the battery life and maintain a high cold amperage capacity
• The battery should be stored on the charger when not in use
• Do not expose the battery to freezing temperatures
• Do not expose the battery to prolonged periods of extreme heat or severely cold temperatures
• Do not expose the battery too long periods of direct sunlight
• The heat will shorten your battery life
• The optimum operating range is between 5 degrees Celsius (40 degrees F) and 40 degrees Celsius (105 degrees F)
• Never drop or bump the battery pack
• This may result in loose or damaged internal connections, and may damage the battery terminals
• When cleaning the lift do not spray water directly on the control box or battery

2. Aqua Creek EZ Manual Pool Lift

Aqua Creek EZ Manual Pool Lift is an affordable, manually operated lift designed for residential use. Also great as a boat access lift. This Pool Lift is ideal for both in and above ground pools. It is easily portable for storage and relocation to another dock or pool area. Aqua Creek’s EZ Manual Pool Lifts offers an affordable option for aquatic access. The durable and adjustable mesh sling allows users to quickly adjust to a comfortable fit.

Benefits of the Aqua Creek EZ Manual Pool Lift

• Have a weight capacity of up to 400 pounds
• Can accommodate pool wall heights up to 16 inches
• Works equally well for above ground or in-ground pools
• Easily portable for convenient storage or relocation

Features of Aqua Creek EZ Pool Lift

• The frame on the EZ Pool Lift has been upgraded to a square tubing to replace the older round tubing
• The new square tube frame provides additional strength and a cosmetic upgrade
• Flexible Mounting Options is available with or without the in-ground mount
• Also, optional surface-mount is available for existing concrete decks, wooden decks, and boat docks
• Swimming pool lifts for disabled persons are a huge factor in promoting the therapeutic action provided by swimming
• This above-ground pool hoist is a manually operated unit designed specifically for residential use
• Made from stainless steel and sporting a durable powder-coated finish
• It is made to be resistant to rust, corrosion, and even the sun's UV rays
• Easily portable for convenient storage or relocation

How to Operate EZ Manual Pool Lift?

• You should always check for worn parts and loose bolt connections prior to each use
• All operators should familiarize themselves with all the Aqua Creek EZ Pool Lift lift components and their intended uses
• User should also be comfortable with all lifting procedures before attempting to lift a person from the lift
• An operator is required to transfer the person being lifted into the pool
• There are two different methods for loading the occupant into the harness, depending on the user's physical ability
• If they are physically able, they can place themselves into the harness without assistance

Precautions and Maintenance for EZ Pool Lift

• NEVER permit children to play on or around the lift
• Do not allow children to use the lift without adult supervision
• NEVER use the lift with a dry pool
• Use only freshwater to wash your lift
• Do not wash with pool water
• Use only clean, soft, non-abrasive cloths to wipe down your lift
• Do not store lift in pump room or near chemicals
• The lift may need to be bonded according to local code requirements
• To remove stubborn stains from the finish, spray affected area with mild dish soap, rub briskly with a 3M Scotch Brite pad
• Use white epoxy paint to touch up the finish
• Apply wax to protect when dry aqua Creek Pool Lift Slings (F-032EZSB)

3. Hoyer Classics Hydraulic Pool Lift

Hoyer Classics Hydraulic Pool Lift offers great support for easier recreation and therapeutic swimming. Pool Lift can be used anytime for placing any client into water. It is constructed of heavy-duty stainless steel and comes with sling and chain. Stainless steel painted finish resists corrosion in humid environments. It is moving and handling equipment, which is used with a mechanical lift in order to facilitate the transfer of a resident.

Benefits of Hoyer Classics Pool Lift

• Made of latex-free materials
• Contains corrosion-resistance finishing
• Consists of a full lifting range of 62 inches
• Ability to fully rotate for ultimate accessibility

Features Hoyer Classics Hydraulic Pool Lift

• Designed to make the swimming experience more enjoyable
• Resistant to humidity and corrosion in the swimming pool environment
• Heavy-duty steel construction
• Full 62" lifting range
• Hydraulic power of this Manual Lift can be used anytime
• 360 degrees swivel helps gently place any client into water
• Product Weight: 60 lbs and weight capacity: 400 lbs

Installation of Cement-in Sleeve

• Position the sleeve location. The proper position for the mast is 8 to 10 inches from the edge of the pool or tub. The cement-in sleeve itself is a cylinder 3-1/4 inches in diameter and 8 inches long. Mark a 6-inch circle if existing concrete is to be removed. In a new installation, position the sleeve on the center and flush with grade.
• When the cement-in sleeve is to be installed in an existing concrete floor or deck, a hole at least 6 inches in diameter must be cut. The opening must be at least 8 inches deep. Fill the bottom of the hole with non-shrinking cement, such as Por-Rok. Make sure the sleeve is perfectly vertical. Fill in around the sleeve with more non-shrinking cement. Allow the cement to set-up and finish the top surface.
• The sleeve is completely embedded in cement and that a good bond is secured between the new and old concrete. When installing the sleeve in a new job, position the sleeve and line it up when the forms are being installed. Pour the concrete around the sleeve as the deck or floor is poured. No special type of concrete is required.

Installation of Lifter

• When the sleeve has been installed as described above and the concrete has had several days to cure, the lifter may be installed. The nylon bearing socket supplied with the lifter must be installed in the sleeve. Grease the outside of the socket lightly before it is inserted into the sleeve. This will prevent corrosion which may cause the socket to stick in the sleeve. Vaseline is an excellent lubricant if no commercial grease is on hand.
• With the socket in place, unpack the lifter and insert the base of the mast into the socket and sleeve. To attach the end of the boom in the yoke hinge at the top of the mast, remove the wing nut and bolt from the yoke hinge and insert the boom end. Reinsert the bolt and secure with the wing nut. Attach the swivel bar to the boom end and keep the chains apart. The lifter is now ready for use.

How to use Hoyer Hydraulic Pool Lift?

To use the Hoyer Swimming Pool Lifter, remove the cover from the floor sleeve and insert the nylon bearing socket. Insert the mast of the lifter into the socket. Attach the long chains to the swivel bar. To use the Hoyer Sling, place the sling under the person being lifted so that the end of the seat comes to the person knees. Attach the ends of the chains to the swivel bar and the S-hooks to the sling. When the person is lifted so that he/she just clears the chair, the lifter boom should be almost at maximum height. The person being lifted can then be lowered the full 62".

How to maintain Hoyer Classics Hydraulic Pool Lift?

• Put a drop of oil on the joints at the top of the mast, top, and bottom of the pump, and the swivel bar hook every other month
• While oiling the lifter, check all the cap nuts and bolts to be sure they are tight.
• Put a drop of oil on the pump handle hinge when the Hoyer lifter is put into service and oil again every other month. This is very important, as the holes in the hinge socket will wear when dry.

4. Aqua Creek Portable Pro Pool Lift

Aqua Creek Portable Pro Pool Lift features a completely portable design, eliminating the need for anchors. The compact frame allows the lift to be transported from or around the pool area with ease. Simply wheel the lift to the poolside, quickly deploy and it is ready to use. Its stainless steel construction allows the Portable Pro Pool lift a 400 pound (181 kg) weight capacity. It has a durable powder coat finish.

Portable Pool Lift Highlights

• Easiest lowering and lifting of a person living with a disability into a pool
• Stainless steel construction is long-lasting and reliable
• Portable design allows easy use without permanent installation
• Adjustable components ensure comfortable support and use

Features of Portable Pro Pool Lift

• Pool Lift features a completely portable design, eliminating the need for anchors
• The compact frame allows the lift to be transported from or around the pool area with ease
• Simply wheel the lift to the poolside, quickly deploy and it’s ready to use
• Have a durable powder coat finish
• The use of flip-up armrests makes lateral transfers easy
• An easy to use, 2 buttons, water-resistant handset gives the user full independence when using the lift
• For additional comfort and security, the lift comes standard with an adjustable footrest and lap belt
• Aqua Creek Portable Pro Pool Lift has a weight capacity of 400 lbs
• Max setback of 12 inches (30 cm)
• All stainless steel construction
• Durable powder coat finish
• Flip-up armrests
• Water-resistant handset
• Wheeled transport cart with counterweights
• Rechargeable battery with wall mount charger

What Precautions and Maintenance required for Portable Pool Lift?

• NEVER permit children to play on or around the lift
• Do not allow children to use the lift without adult supervision
• NEVER apply direct water pressure to the electronics
• Do not use the Portable Pro Pool-AT for the deck to waterline measurements over 9”
• NEVER operate lift without the 14 weight plates installed
• NEVER use the lift with a dry pool
• For safety reasons, NEVER swim alone
• Use only freshwater to wash your lift
• Do not wash with pool water
• Use only clean, soft, non-abrasive cloths to wipe down your lift
• Do not store lift in pump room or near chemicals
• When cleaning the lift, do not spray water directly on the control box or battery
• To remove stubborn stains from the finish, spray the affected area with mild dish soap, rub briskly with a 3M Scotch Brite pad
• Use white epoxy paint to touch up the finish
• Apply wax to protect when dry

5. Aqua Creek Scout 2 Pool Lift

Aqua Creek Scout 2 Pool Lift features an adjustable seat pole, robust base, and a stronger actuator. This Spa Lift is certified for in-ground anchoring. It is capable of clearing wall heights up to 11 inches high with the standard footrest. The optional pull-out leg rest may be used for greater clearance of up to 26 inches on raised or above-ground pool and spa applications. This pool lift will accommodate most existing anchors by utilizing adapter sleeves. The lift can rotate 360 degrees in either direction providing versatility and accessibility solutions.

Why choose Scout 2 Pool Lift?

• Made with stainless steel
• Has an attractive powder coat finish
• Includes: Battery, Headrest, Chest strap and Cover
• Adjustable lap belt

Benefits of Spout 2 Spa lift

• ADA compliant pool lift
• Designed for in-ground anchoring
• Clearances vary by wall height and width
• All stainless steel construction
• Durable powder coat finish
• Flip-up armrests
• Adjustable lap belt
• Removable and adjustable footrest
• Water-resistant handset
• Rechargeable battery with wall mount charger
• Adjustable seat pole, no anchor

What precautions to take for using Pool Lift?

• Use only freshwater to wash your lift
• Do not wash with pool water
• Use only clean, soft, non-abrasive cloths to wipe down your lift
• Do not store lift in pump room or near chemicals
• Do not allow children to play on or around this lift
• When cleaning the lift, do not spray water directly on the control box or battery
• The lift may need to be bonded according to local code requirements