Vasyli Custom Green Full Length Low Density Insoles

CUSTOM-FIT

Vasyli Custom Red Insoles are heat-moldable for a custom fit.

BACK, KNEE AND HEEL PAIN

Vasyli Custom Red Insoles help relieve heel, knee, or back pain.

WALKING AND EVERYDAY USE

These High-Density Insoles are ideal for walking and everyday use.

CUSTOM-FIT SHOES

Vasyli Custom Red Insoles are designed for custom-fit shoes.

BOOTS

They are appropriate for men's and women's hiking boots.

CASUAL SHOES

Ideal for most men's shoes and broad-fitting, flat footwear for ladies.

ATHLETIC USE

Covered in a bonded fabric, they are suitable for athletic footwear.

SHOES FOR KIDS

Vasyli High-Density Insoles can be used in shoes for kids.

1. First, check the shoes into which you will fit the orthotic. If the shoe is too badly worn, it must be replaced. If the shoe has some form of thick lining or arch cushion, remove it from the shoe.
2. Now pick a size of device that closely fits the contours of the foot. For greater accuracy, simply place the orthotic on the foot and see how it compares to the natural contours, making sure the distal edge of the orthotic finishes 5-10 mm behind the bisection of the 1st MPJ.
3. Fit the device to the extreme back of the shoe and ask the patient to walk around the room for a few steps. If there is no irritation, then allow the patient to wear the orthotic at home.
4. It may take a few days for the feet of the patient to become accustomed to the orthotic. If any discomfort occurs, have the patient remove them for one or two hours, then replace them and continue to remove and replace them until comfortable.
5. If the patient is still suffering from initial symptoms after a typical break-in period of 3 to 5 days, you may need to reassess the density of the orthotic and adjust your orthotic prescription. Excessive arch intolerance usually indicates a lack of rearfoot control and additional rearfoot posting may be required.