Timm Medical Pos-T-Vac BOS 2000 Battery Operated Penis Pump

Pos-T-Vac BOS 2000 Battery Operated Penis Pump Features

• Powered by batteries, providing cordless and portable operation
• Offers adjustable suction levels, allowing users to customize the intensity of the vacuum according to their comfort and individual needs
• Designed with user-friendly controls, typically including a power button and additional buttons to adjust the suction levels
• Equipped with a quick-release valve or mechanism, allowing for the immediate release of vacuum pressure in case of discomfort or emergency situations
• Designed to be used in conjunction with tension rings or constriction bands
• It incorporates safety features such as a quick-release valve and instructions for proper usage to minimize the risk of injury or discomfort

How does this system work?

Pos-T-Vac BOS 2000 Pump is a vacuum therapy treatment for impotence. The system creates a vacuum around the penis to help the natural flow of blood into the penis. Most men will also need to use one of the tension rings to hold their erection. The system will assist you in maintaining a full and satisfying erection in most cases.

Parts description:

Frequently Bought Together

• Timm Medical Pressure Point High Tension Ring For Erecaid Systems
• Timm Medical Aquagel Lubricant
• Timm Medical Pos-T-Vac Mach Ring

How to use Pos-T-Vac Battery Vacuum ED Pump System?

1. Lubricate your penis, the inside of the penile tube, and the pubic hair area (the area that comes in contact with the adapter bushing), with water-soluble sealing gel. This helps form a good vacuum seal on your body and prevents the penis from sticking to the walls of the tube.
2. Insert the penis into the penile tube and start the vacuum process.
3. Operate the battery pump by depressing the activation button. This should develop a low level of vacuum sufficient to create a seal between the system and your body. Operate the manual pump by pushing and pulling the handle. Each time you pull the handle or pumped back (approximately 2-inch stroke) you create a vacuum in the penile tube. Three to five strokes should create a low-level vacuum sufficient to create a seal between the system and your body. Repeat this step 4 to 5 more times until you have developed a sufficient vacuum. Use the least amount of vacuum necessary to obtain the erection.
4. As soon as the desired erection is achieved, transfer the tension ring onto the base of the penis with your fingertip. Make sure the ring is transferred all the way around. Any vacuum that is left can be released by depressing the manual vacuum release button. Practice a few times without the tension ring. If a condom is desired it should be applied after erection is formed.
5. Following use, the tension ring, bushing, and tube should be rinsed with warm water, dried, and stored. Make sure the tension ring bag is air free and tightly sealed for longer life. Never Put The Pumphead in Water. After you have been using the system for 30 to 60 days, you may want to recheck the sizing of the tension ring. For example, you may find that you are now able to use the next size larger ring.

How to Load the Tension Rings?

1. How to Load the Tension Rings Start with the largest tension ring. If you are unable to hold the erection with the larger ring, gradually use the next smallest tension ring until the ring is able to hold the erection.
2. Ensure the pump head and adapter bushing are removed from the penile tube. Place a towel on a firm, flat surface (waist-high works best). Place the penile tube on the towel with the smooth end of the tube facing up. The towel will help the tube remain in place while loading the tension ring.
3. Place the loading cone into the smooth end of the penile tube. Generously lubricate the entire surface of the loading cone, top to bottom, and all around. Use only water-soluble sealing gel.
4. Grasp the two handles of the tension ring as shown. Place your thumb tips on top of the tension ring next to the cone surface, and press the tension ring down. Your thumb tips will glide along the surface of the cone. Place the tension ring near the end of the cylinder for easy offloading to the base of the penis. (Do not load the tension ring onto the cylinder by pulling the handles, they may tear.).
5. Remove the cone from the penile tube and attach the penile tube to the vacuum pump. Place the adapter bushing in the open end of the penile tube. If loose scrotal tissue travels into the tube use the smaller bushing. If you us more than one ring, choose a second ring and repeat steps 1 through 4.

Frequently Asked Questions

1. What if I am not able to achieve a full erection the first time I use the system?

Practice sessions may be necessary to achieve a satisfactory erection if it has been a while since you have good potency. A practice session is when you take 5 minutes a day (for 1 to 2 weeks) and create as many erections as you can in this time period. You simply create an erection and hold it for around 5-10 seconds. You then release the pressure by pressing the "pressure release button" and you will lose the seal and the erection. After that you, you simply repeat the same procedure again and again until you have done so for 5 minutes. This will free up proper blood flow and help restore the corpora cavernosa (the two canals that fill with blood). This is a safe and effective way to rehabilitate.

2. How long do you wear the Tension Ring?

The Tension Ring should be worn for no more than 30 minutes. After the ring is removed, please wait 1 hour before creating another erection.

3. Is there an age limit to using Vacuum Therapy?

No, there is no age limit as Vacuum Therapy works regardless of your age.