Thuasne Sport Series Ligament Bracing

Thuasne Sport Series Features

• Prescribed for patients who have experienced mild ligament injuries and/or reconstructive knee surgery
• The Fiber Cool sleeves feature an open cell material that reduces sweating and enhances comfort
• The anterior closure models are easier to put on and allow for individual tightening of the thigh and tibia sections
• The longer four strap models are recommended for taller patients and additional stabilization 
• he standard hinges have a fixed non-adjustable 5 degree extension stop

Thuasne Sport Series Fitting Instructions

• The aluminum bars can be contoured to the leg
• Pull On sleeves come with optional patella bolsters that can be affixed inside the sleeve to enhance knee cap stabilization or comfort
• ROM, adjustments can be made to extension and flexion stop settings. There are pockets on the medial and lateral sides of the sleeve that can be opened to allow you to expose the hinges to make adjustments

Extension Stop Instructions
- At the time of fabrication, a zero degree extension stop has been installed in the TM5+ Hinge. To install a different extension stop, follow these instructions

• Twist off the desired stop from the nylon stop tree
• Remove the screw located on the side of the hinge
• After removing the screw, flex the brace and remove the zero degree stop from the hinge. Note the direction the stop is facing
• Insert the desired replacement stop, hole end first, with the hook end at the top and facing forward. Straighten the brace to full extension to push the stop down into position. The small hole in the stop must be aligned and visible through the screw hole so the screw will thread into the stop
• Reinsert and tighten the screw. Flex and extend the brace several times to ensure the stop is locked into position and functioning properly