Teakworks4u ADA L-Shaped Transfer Seat With Drop Down Legs

Teakworks4u L-Shaped Transfer Seat Benefits

• Seat battens that are spaced slightly apart to allow water to drain through
• All fasteners used in the construction and drop down legs are made of marine grade stainless steel
• Stainless steel hardware included
• Heavy duty type 304 18-gauge stainless steel wall brackets, supports and frame
• Height Range is 17 inches -19 inches
• Note: Orientation is determined by which side of the seat is deeper when sitting on the bench. Act as though you are sitting on the bench, if you want the extended portion on your right hand side, it is a right-handed bench, if you want it on your left hand side, it is a left-handed bench

More about Teakworks4u Products

Burmese Teak

• Made of pure heartwood from mature Teak trees grown in the Indonesia/South East Asia region
• Heartwood Teak provides an elegant piece with unique grain patterns and a beautiful rich color giving any area an immediate wow factor
• The high silica content in teak makes it an ideal wood to use when a slip resistant surface is needed and the natural oil makes the wood resistant to mold and mildew

Installation and Load Bearing

• All shower seat must be installed using suitable fasteners and sufficient in-wall backing materials 
• ADA mounting height for lowered seat is 17" (432mm) to 19" (482mm). 
• When properly installed, all shower seats have been designed and manufactured to support loads exceeding the downward pull requirements for Federal specifications FHA, VA, HUD, hospital codes, and private construction. 
• The actual "in use" load bearing capacity of any shower seat, however, will be limited by the strength of its mounting surface and installation hardware. 
• It is recommend that shower seats be installed using 2" minimum thickness "in wall" solid wood blocking material with #10 x 2" stainless steel, phillips-head, sheet metal screws, or using a wall embedded, minimum 12 ga. (2.8mm) steel anchor plate with #10 x 24 stainless steel machine screws. 
• Under no circumstances should any shower seat be mounted to drywall, sheet rock, plaster, fiberglass, acrylic or other similar "hollow" wall surfaces without appropriate wood or steel backing material. 

Cleaning Instructions for Teakworks4u Products

• Cleaning can be done in your shower or outdoors if you want to move everything out there for more room 
• Do not use a powder washer 
• For quick cleaning:
  -simply apply water with soft bristle brush in the shower area and lightly scrub the teak surface with a soft bristle brush. Then rinse teak surface with clean water and wipe dry. 
• For deep cleaning:
  -We recommend a commercial teak cleaner to remove any mild dew or discolorations that have accumulated. These cleaners would not strip the wood of its natural oils and non-slip characteristics.