Silent Call Legacy Series Doorbell Transmitter with Remote Button

Features

• Silent Call Legacy Series Doorbell Transmitter with Remote Button includes:
  - Doorbell 318 MHz Transmitter with Remote Button
  - Product Manual
  - Velcro for mounting
  - 2 AAA batteries
• Signals when a visitor pushes the doorbell button
• Button connects by wire to the transmitter
• Operates on 2 AAA batteries
• Also available (separately):
  - Silent Call Sidekick Receiver Deluxe Notification Kit (Code SK-Kit-4D)

More Information

• Installation:
  - Mount the transmitter preferably on an inside wall near the location for the button
  - Install the supplied button outside where desired
  - Drill a hole in the wall behind the button, pass the wires through from the transmitter and connect them to the terminals in the button
• Operation:
  - When the remote button is pressed, the transmitter will cause a DOOR indication on any Silent Call receiver except the Shakeup
  - Range is approximately 100-500 feet, depending on which Silent Call Receiver you are using and the local conditions
  - This unit is powered by 2 AAA alkaline batteries which should last a year or more, depending on use
• Switch settings:
  The Silent Call system is digitally coded. The code sent by the transmitter must match the code that your receiver has been set for. All Silent Call receivers and transmitters leave the factory set for the default code of 1, 2 and 3 = OFF and 4 and 5 = ON. Unless you have changed the code in your receiver from the factory default setting, you do not need to change the switch settings in your transmitter.
  The code switch is accessed by removing the battery cover. The first five positions (left to right) determine the code that the transmitter sends when it activates. Positions 6-9 determine which light activates on your receiver. Do not change the settings of positions 6-9. If you accidentally disturb them, the correct setting for positions 6-9 is 6 ON, 7 ON, 8 OFF, 9 ON.