Rolyan Solid TailorSplint Splinting Material

Features of Rolyan Solid TailorSplint

• Adaptable to a wide range of applications, encompassing everything from hand splints to larger orthoses
• Balances drapability and stretch resistance to create a splinting material that is both adaptable and supportive
• Once fully molded, the splint Is able to be used indefinitely as long as it is taken care of properly
• It's made of non-stick, low-temperature, professional-grade thermoplastic
• The TailorSplint also demands minimal shaping, using only mild strokes
• The solid sheet provides the most stability
• For one to five minutes of working time, one minute or less of water heating at temperatures of 150 to 160 degrees F is required

What to buy with Solid TailorSplint Splinting Material

• Biofreeze Professional Pain Relieving Gel
• Bell-Horn Fast Freeze Pro Style Continuous Therapy Spray
• Bell-Horn Fast Freeze Pro Style Therapy Roll-On

Care and Cleaning of Rolyan Thermoplastic Splint Material

The shelf life of low-temperature splinting materials is indefinite under the following conditions:

• Store at temperatures between 40°F and 90°F (4°C and 32°C)
• Store at less than 65% relative humidity
• Avoid prolonged exposure to light, especially ultraviolet light
• Avoid exposure to corrosive fumes and ethylene oxide fumes

Storage Instructions of Rolyan Solid TailorSplint

Temperature:

• 1/16" (1.6mm): 150°F to 160°F (65° to 70°C) water for 30 seconds
• 3/32" (2.4mm): 150°F to 160°F (65° to 70°C) water for 30 to 45 seconds
• 1/8" (3.2mm): 150°F to 160°F (65° to 70°C) water for 1 minute

Time:

• 1/16" (1.6mm): 1 minute of working time
• 3/32" (2.4mm): 2 to 3 minutes of working time
• 1/8" (3.2mm): 3 to 5 minutes of working time