Roho High Profile Sensor Ready Cushion

Features of Roho High Profile Sensor Ready Cushion

• Sensor Ready: Is a quick disconnect port that allows the cushion to connect to Smart Check.
• Shape Fitting: The cellular design allows the cushion to track movements of the body and constantly conform to it. The cells adapt to meet unique skin/soft tissue integrity needs throughout the day.
• Skin Protection: Proven with over forty years of research, experience and refinement, Roho Dry Floatation technology provides an individual with unparalleled skin/soft tissue protection.
• Appropriate for individuals who:
  • Have normal or impaired sensation
  • Want instant feedback and peace of mind that the cushion inflation level is correct
  • Require accommodation of pelvic asymmetry; up to approximately 3 in (7.5 cm) for High profile
  • Want assistance with setting up their cushion have a history of, currently have or may be at risk for skin/soft tissue breakdown
• Standard Cover: Two-way stretch top, spacer fabric sides, with a zipper located in the back of  the cover; and a non-skid bottom with hook and loop fasteners to help secure the cushion in the chair. Refer to cover care label for material content
• Heavy Duty Cover:
  • Two-way stretch, fluid-resistant top and sides, with a zipper located in the front of the cover; and a non-skid bottom with hook and loop fasteners to help secure the cushion in the chair. Refer to cover care label for material content
  • The simple adjustment and conformity of the cells accommodates and meets the unique skin soft tissue integrity needs of each individual throughout the day
  • As the individuals body changes over time, so will the cushion
  • Neoprene rubber
  • Latex-free
  • It is for those who require pelvic asymmetry, up to approximately 3 inches for the High Profile, 2.75 inches for the Mid Profile and 1.75 inches for the Low Profile
• Smart Check Device: It is a sensing device used in the set up and monitoring of Roho cushions. It is a feedback system that is intended to assist the user by saving an inflation range during cushion setup. Smart check must be connected to a cushion to indicate whether adjustments are needed to remain in the saved range.
• Smart Check:
  • Lightweight
  • Portable
  • Press-to-check inflation monitor
  • Stores individuals inflation level
  • Offers Smart and Optional Setup modes
  • Ability to reset can store new inflation level for individual physiological changes over time
  • Unlimited frequency to check
  • Automatic power off
  • Detachable
  • Durable
  • Easy to clean and disinfect

What to buy with Roho High Profile Wheelchair Cushions

• ROHO Planar Solid Seat Insert
• Skil-Care Lateral Stabilizer Armrest Bolster

How to use ROHO High Profile Cushion?

How to Inflat the Roho High Profile Cushion?

• Place the cushion in the wheelchair with the air cells facing up and the non-skid surface of the cover facing down. Consult your prescriber about alternate positions of inflation valves.
• Slide the rubber nozzle of the hand pump over the inflation valve. Pinch the nozzle, turn to open the inflation valve, and inflate the air cells.
• When all of the air cells are inflated and the cushion begins to arch slightly, pinch the rubber nozzle of the hand pump and turn to close the inflation valve completely.
• Remove the hand pump.
• Repeat cushion inflation for all valves.

How To Adjust Your ROHO Cushion?

1. Place cushion on chair, making sure it is centered with air cells up, with air valve in front, left corner (when the user is seated). Turn valve counterclockwise to open.
2. Slide the rubber nozzle of pump over the valve and inflate the cushion until it begins to slightly arch upward.
3. Pinch the pump nozzle and turn valve clockwise to close. Remove pump. (Repeat steps 1 - 3 for remaining air valves on multi-valve cushions.)
4. Have the user sit in the chair, making sure the cushion is centered underneath. The user should be seated in their normal sitting position.
5. Slide your hand between the cushion surface and the user bottom. Lift their leg slightly and feel for their lowest bony prominence. Then lower their leg to a sitting position.
6. Turn valve counterclockwise to let out air, while keeping your hand under the lowest bony prominence of person. Release air until you can barely move your finger tips – no more than 1 inch (2.5 cm) and no less than 1/2 inch (1.5 cm). Turn valve clockwise to close.

Sensor Ready Cushion Owners Manual

How to clean ROHO High Profile Pillow?

• To Clean the Cover: Remove the cover. Machine wash in cold water (30 degrees C) with mild detergent, gentle cycle, or wipe clean with neutral detergent and warm water. Tumble dry low.
• To Clean the Cushion: Remove the cover, close valve and place in a large sink. Hand wash, using mild liquid hand soap, hand dishwashing liquid, laundry detergent, or a multipurpose detergent. Gently scrub all cushion surfaces, using a soft plastic bristle brush, a sponge or a cloth. Rinse with clean water. Air dry. Do not expose to direct sunlight.

Warnings :

• Check skin frequently, at least once a day. Skin/soft tissue breakdown can occur due to a number of factors, which vary by individual. Redness, bruising, or darker areas (when compared to normal skin) may indicate the beginning of soft tissue breakdown. Consult with a clinician immediately
• The cushion and the cover must be compatible sizes and must be used as directed in this manual. If they are not: 1) The benefits provided by the cushion may be reduced or eliminated, increasing the risk to skin or to other soft tissue, and 2) the individual may become unstable and vulnerable to falling
• Do not use an under-inflated cushion or an over-inflated cushion because the product benefits will be reduced or eliminated, resulting in an increased risk to the skin and other soft tissue. If the cushion does not appear to be holding air, or if you are not able to inflate or deflate the cushion, see troubleshooting. Immediately contact your clinical caregiver, distributor, or ROHO, Inc. if the problem persists
• Do not use your cushion on top of, or in conjunction with, any other products or materials, except as indicated in this manual. Doing so may cause the individual to become unstable and vulnerable to falling
• Do not use this cushion as a water flotation device (e.g. a Life Preserver). It will NOT support you in water

Caution:

• Do not use a cover or a repair kit other than those provided by ROHO, Inc.
• The ROHO Sensor Ready Cushion is intended to be inflated only with the ROHO Hand Pump
• Do not modify the cushion or any components. Doing so may result in damage to the product and will void the warranty
• Do not allow oil-based lotions or lanolin to come in contact with the cushion. They may degrade the material
• Prolonged exposure to ozone may degrade materials used in the cushion, affect the performance of the cushion, and void the product warranty
• Changes in altitude may require adjustment to the cushion
• Keep the cushion away from sharp objects
• Do not expose the product to high heat, open flames, or hot ashes
• If the cushion has been in temperatures lower than 32º F (0°C) and exhibits unusual stiffness, allow the cushion to warm to room temperature
• Do not use the inflation valve, the quick disconnect, or hoses as a handle for carrying or pulling the cushion. Carry the cushion with the Yellow Rope, the cushion base, or the carrying handle on the cover