Pride Raptor Mobility Scooter Features
- Pride Raptor 3 Wheel Mobility Scooter has the user-friendly tiller that features an easy-to-read LCD console to monitor the estimated speed, mileage and battery display
- The rear, lockable storage compartment under the seat provides a safe place for personal items, and is equipped with a seat support rod
- With a 400-pound weight capacity, the Raptor is the perfect scooter for anyone and everyone
- Hand brake with regenerative braking system
- Full LED lighting package with directional signals and brake lights that offer full visibility for increased safety
- Easy-to-read LCD console with which shows estimated speed, mileage and battery display
- Secure, lockable under seat storage compartment with seat support rod
- Sleek and solid design for enhanced stability
- Front and rear suspension
- Front storage compartment located on the tiller
- Limited recline, fold-flat seat with manual adjustment and angle/width adjustable armrests
- Two rear-view mirrors
- Tubeless pneumatic tires for a smooth ride
- XLR USB Charger
Why choose Raptor 3 Wheel Mobility Scooter?
- 400 lbs. weight capacity
- Up to 14 mph maximum speed
- 60" turning radius
- 19 miles per charge at 400 lbs., 31 miles per charge at 220 lbs.
- 20" x 18" Limited recline fold-flat seat with manual adjustment and angle/width adjustable armrests
Click here for Owner's Manual
Click here for Safety Guide
Click here for Specification Manual
Â
What to buy with Pride Raptor 3 Wheel Mobility Scooter
Care & Maintenance of Pride Raptor Mobility Scooter
Follow these easy steps for a quick and safe repair for solid tires:
- Remove the key from the key switch and ensure your Travel Scooter is not in freewheel mode.
- Elevate the side of the Travel Scooter of which you are removing the tire. Place wooden blocks under the frame to elevate the Travel Scooter.
- Remove the drive wheel nut and washer from the axle.
- Pull the wheel off the axle.
- Slide the new wheel onto the axle. Make sure the the axle key is in the axle slot
- Reinstall the washer and drive wheel nut onto the axle and tighten
- Remove the blocks from beneath the Travel Scooter.
Cleaning & Disinfection of Raptor Scooter
- Use a damp cloth and mild, non-abrasive cleanser to clean the plastic and metal parts of your Travel Scooter. Avoid using products that may scratch the surface of your Travel Scooter
- If necessary, clean your product with an approved disinfectant. Make sure the disinfectant is safe for use on your product before application.
Storing Raptor 3 Wheel Mobility Scooter
If you plan on not using your Travel Scooter for an extended period of time, it is best to:
- Fully charge its batteries prior to storage
- Remove the battery pack from the Scooter.
- Store your Scooter in a warm, dry environment.
- Avoid storing your Travel Scooter where it will be exposed to temperature extremooes.
- Recommended storage temperature: -40°F/-40°C to 149°F/65°C.
 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Pride Raptor 3 Wheel Mobility Scooter Specifications
| Specification |
 |
| Model |
Raptor 3-Wheel |
| Weight Capacity |
400 lbs. |
| Front Tire |
3"x16" |
| Rear Tire |
3"x16" |
| Maximum Speed |
14 mph |
| Ground Clearance |
3.5" at center of frame |
| Turning Radius |
60" |
| Length/Width |
59"/24.75" |
| Seating |
High back 20w x 18d (100° Limited Recline) |
| Seat-to-Ground |
28" |
| Weight (w/o Batteries) |
208 lbs. |
| Seat-to-Deck |
19" |
| Battery Weight |
53 lbs. each |
| Battery Requirements |
75 (AH) |
Per Charge Range
(Max.) |
19 miles (up to 400 lbs. and full speed)
31 miles (up to 220 lbs. and at low speed) |
| Battery Charger |
8 amp |
| Suspension |
Front and rear |
| Weight of Heaviest Piece |
(unit does not disassemble) |
| Warranty |
2 year limited |
Warranty
- Lifetime limited warranty on frame
- 2-year limited warranty on electronics
- 2-year limited warranty on drivetrain
Related Articles
{{x.ShortDescription}} ...
Share
