MIC KEY Jejunal Feeding Tube Kit Extension Sets With Enfit Connectors

Benefits of MIC-KEY Jejunal Feeding Tube Kit

• Designed with high quality rubber and polyurethane plastic material
• Comes with Enfit connectors and stylets
• Extension kits are also available for ease of usage
• Low profile feeding NJ tubes
• Low-profile design
• Silicone internal retention balloon
• Gastric decompression port

What to buy with Jejunal Feeding Tube Kit

• CLOG ZAPPER Enteral Feeding Declogging System
• ENTRAL Filter Straw With Enfit Connector
• ENTRAL Syringe Cap With Enfit Connector

How to assemble Jejunal Feeding Tube Kit Extension Sets?

1. Open the jejunal port cover located at the top of the MIC-KEY Jejunal Feeding Tube.
2. Insert the MIC-KEY Continuous Feed Extension Set with ENFit Connectors by aligning the black line on the SECUR-LOK connector with the black line on the MIC-KEY Jejunal port.
3. Lock into place by pushing in and rotating the SECUR-LOK connector Clockwise until a slight resistance is felt (approximately 1/4 of a turn).
   Caution: Do Not rotate the connector past the stop point. 
4. To remove the extension set, rotate it counter clockwise until the black line on the SECUR-LOK connector aligns with the black line on the MIC-KEY Jejunal port 
5. Remove the set and cap the jejunal port with the attached port cover.
   Caution: Never connect the jejunal port to suction. Do not measure residuals from the jejunal port.