Medline Transfer Bench with Back

Transfer Bench with Back Features

• It consists of a suction cup feet in the tub that provides a secured feel to the user and provides added stability
• Reversible seat back whose direction can be changed as per the requirement without using any tools
• Offers enhanced security, support and stability
• This Bathroom Seating Bench includes a side arm that provides more stability and leverage
• Ideal for people with limited mobility or people recovering from a surgery

How to Assemble Medline Tub Transfer Bench?

• Remove contents from box.
• Lay transfer bench upside down on a flat surface.
• Attach leg with the large suction cup by depressing the pushbutton and inserting into the receptacle tube until the pushbutton snaps and locks into place. Repeat for second leg.
• Attach leg with small rubber tip by depressing the pushbutton and inserting into the receptacle tube until the pushbutton snaps and locks into place. Repeat for second leg.
• Turn transfer bench right-side-up. Depress armrest pushbuttons and slide into the armrest receptacle tubes with armrest arching outwards.
• To assemble backrest, insert pole into backrest support by depressing pushbutton and sliding into receptacle tube until it locks into place. Repeat for second pole
• Insert backrest into base by depressing pushbuttons and sliding supports through both receptacle tubes.
• Place legs with suction cups into bath tub.

NOTE: Back support is reversible to accommodate left or right tub entry. You can also change the seat depth of your transfer bench by pushing the pins under the seat and sliding the tubes forward until the pins lock into place.

How to adjust the Leg Height of Transfer Bathroom Bench?

• Before use, adjust the height of each leg to your specific needs, making sure all legs are at the same height.
• When your desired height is reached, lock legs into place by aligning buttons with holes until they “snap” into place.
• Make sure legs are locked into place by pushing down or by pulling up on legs.

Medline Transfer Bench with Back Instruction Manual
 

What to buy with Medline Transfer Bench with Back

• Medline Knurled Chrome-Plated Wall Grab Bars
• Medline Hand Held Shower
• Medline Rain Shower Curtain

How to clean the Transfer Bench with Back?

• Clean with regular household cleaning products.
• Use a non-abrasive cleaner with warm water.
• Wipe dry after cleaning.
• DO NOT use abrasive powders, cleaners or scouring pads

Warnings and precautions:
Before using the transfer bench with back, ensure the following:

• All push buttons are fully protruded and are properly engaged.
• There are no loose, broken or missing components and ensure all parts are secure.
• When using the backrest, ensure the product remains balanced. Excessive twisting or turning while seated on the bench may cause a loss of balance and/or damage to the product.
• All four legs touch the floor simultaneously at all times.
• The tips on the leg extensions do not contain any rips, wear or are missing. Immediately replace missing or damaged tips.
• DO NOT assemble and use this product without first reading and understanding this user guide, otherwise injury or damage may occur.
• DO NOT use if components are missing or are damaged
• DO NOT exceed weight capacity listed on the product.
• DO NOT make any adjustments while using the product.
• DO NOT attempt to use the arms to support full body weight.
• DO NOT stand on the product.