Jodi-Vac Pro Pressure Hearing Aid Vacuum System

Features

• Jodi Vac Pro Pressure Hearing Aid Vacuum System includes:
  - (1) Spare vacuum filter
  - (1) Pink ITE, ITC, CIC, RIC needle
  - (1) Black BTE ear mold needle
  - (1) Light Blue open ear thin tube needle
  - (2) Steel reamers
  - (3) Flexible air pressure needles
• Vacuum/Press on or off switch
• Air pressure assembly, non removable
• Vacuum filter assembly with ball (do not clean, they can be filled up and then replaced inexpensively)
• Inserts for needle storage
• Box: 6.5" x 4.5" x 2.5" tall
• Pump:
  - Vacuum is 22.5" of Mercury and is serviceable
  - Pressure is 38 and above PSI
• Motor:
  - Motor carries an industrial rating of 2000 hours of continuous operation
• Electrical:
  - All components operate at 12VDC
  - Accepts ac voltage from 100-240vac, operating at 50/60Hz converting to 12VDC
• Air pressure:
  - 3 reinforced flexible air pressure reamers used as a vent reamer, excluding pressure vents
  - Blue coiled tube extends to a full length of 35"
• Vacuum:
  - Medical grade LuerLoc filter is easily replaceable
  - Reusable ball in the filter is a flow indicator, an unclogged needle sends the ball towards the connector
  - 3 needles specifically designed for hearing instruments and two reamers are included
• Note:
  - Home use of this product should get 12 months service
  - Household consumer will get only one type of needle which is PINK ITE, ITC, CIC, RIC needle while professional consumers would get all three needles

More Information

• Electrical:
  - All components operate at 12VDC
  - Power supply is a small Energy Star desktop transformer
  - Interchangeable ac cords are available as required
• Vacuum:
  - Wax/debris collects in filter and a busy office should get six months of use from one filter
  - Vacuum filters are not serviceable, replace when full
  -  Needles range in size to efficiently clean large earmolds, ITE, ITC, CIC, RIC and Thin Tubes
  - Blue Coiled tubing extends to a full length of 35"
• Air Pressure:
  - ISO LuerLoc assembly is permanently attached to blue tubing
  - 3 reinforced flexible air pressure needles used as a vent reamer, excluding pressure vents
  - Blue coiled tube extends to a working length of 35"
  - Air pressure also serves to dry and blow debris from battery compartments, volume controls, push buttons and switches
• Normal Operation
  - Turn on switch to Vacuum, use needle vacuum
  - The White ball in the filter assembly is an air flow indicator
  - When air is flowing through the needle past the filter, it pushes the ball towards the tubing on its way to the vacuum pump
  - If the air stops flowing, the ball drops away from the tubing
  - Please clean the needle first as the filter takes a long time to fill up with debris
  - Clean the needle while the vacuum is running, insert reamer into needle to push lodged wax into filter
• Cleaning:
  - Use a lint free cloth with alcohol or ammonia and wipe all parts of this unit
• Important safeguards: To reduce the risk of electric shock:
  - Always unplug this product immediately after using
  - Do not use while bathing
  - Do not place or store product where it can fall or be pulled into a tub or sink
  - Do not place in or drop into water or other liquid