Infinity Enteral Feeding Pump Bag Set with ENFit Connector

How to Use Infinity Feeding Pump Bag?

• _ If using a backpack
  - Hold the enteral bag’s funnel upright and pour in feeding formula. Close cap tightly
  - Unscrew the protective cover counterclockwise from the ENFit connector
  - Prime the settings manually and remove air by turning the bag upside down and tilting the bag to keep the air at the tubing port. Gently pinch teal-colored tubing. While pinching, gently squeeze the bag at the same time to assist fluid flow. Hold this position until the formula reaches the feeding tube connector
  - Loop the silicone tubing around the pump wheel stretching lightly. Seat the cassette into the pump and close the door
  - Screw the ENFit connector clockwise into the feeding tube firmly by hand. Be careful not to overtighten
  - Place the pump into the backpack and secure it with straps
• If using an IV pole
  - Hold the bag’s funnel upright and pour in the feeding formula. Close the cap tightly and hang a bag
  - Unscrew the protective cover counterclockwise from the ENFit connector
  - Loop the silicone tubing around the pump wheel stretching lightly. Seat the cassette into the pump and close the door
  - Turn the pump on by pressing and holding the ON/OFF key until the pump beeps. Then, press and hold the PRIME key until the formula reaches the feeding tube connector
  - Screw the ENFit connector clockwise into the feeding tube firmly by hand. Be careful not to overtighten
  - To manually prime, gently pinch the teal-colored tubing. While pinching, gently squeeze the bag at the same time to assist fluid flow. Hold this position until the formula reaches the feeding tube connector
• Also Buy Separately
  • Bard Button Low Profile Decompression Tube