Homecraft Toilet Safety Frame

Homecraft Toilet Safety Frame Features

• Rust-resistant
• Aluminum construction
• Sturdy secure armrests
• Light weight frame
• Supports up to 300 lbs
• Height adjusts from 26"0-30"
• Measures 20"W x 17-1/2"D x 27"H
• Skid-resistant rubber tips

Note: This item cannot be returned or exchanged due to hygienic reasons

Homecraft Toilet Safety Frame User Manual
 

More Information

Assembly Instructions: Remove the toilet seat and lid, and place the hardware aside for later use. Place the holes on mounting bracket on the holes of toilet bowl. Return the seat and lid to position on top of the mounting bracket, and use existing hardware to attach and secure. Slide arm supports through both sides of the bracket and tighten thumb screws to secure.

Adjusting Height of Frame: The arm supports can be set at a height between 26" and 30". Press and hold the push button while sliding the leg up and down.When the desired hole is reached, release the button. Double check that the legs are set at same height and that buttons are fully engaged in the chosen hole.

Care: Use a mild cleaning product no abrasive, scouring pads or solvents including lacquer thinner, turpentine and acetone.

Precautions: Do not exceed the user weight of 300 lbs. Test for stability before use. Grip the supports securely and sit/stand. The frame serves as a stability aid; it does not support the total weight of an individual. Assistance or supervision must be provided for those who are too weak or uncoordinated.