Homecraft Heavy Duty 3 in 1 Commode

Features of Homecraft 3 in 1 Commode

• Made from corrosion-resistant, rust-proof aluminum to strengthen and stabilize the commode
• Holds up to 350 lbs. of evenly distributed weight and can be used as a commode over the toilet, a bedside commode, or toilet safety frame
• Features a removable commode pail, cover, splash guard, padded armrests, height adjustable legs with non-skid feet
• Adjust the height by depressing the height adjustment button while sliding the lower leg upward or downward until the button is fully engaged in the desired hold

3 in 1 Commode User Manual

What to buy with Commode Over Toilet

• Drive White Powder Coated Grab Bar
• Drive Knock Down Padded Transfer Bench
• Skil-Care Gel Foam Toilet Seat Cushion

How to Install 3 in 1 Commode Over Toilet?

• Attach the back and arms to the frame. Place the Commode on a level floor. Determine the leg height that will ensure the safety and comfort of the user.
• To adjust: depress the spring button on the leg, slide it to the proper hole and release the button.
• While adjusting the other three legs, make sure the buttons are set at the same height as the first.
• At this point and before each use, make sure that buttons protrude through the holes so the height is locked.
• To double-check the security, try to move the legs up and down; if the legs move, the buttons are not locked.
• Set the commode on a level floor, where it will be stable and thus safe for the user. Any instability puts the user at risk of sliding off the commode and falling

How to Apply Commode Over Toilet?

• Check the stability of the commode again. To maintain balance when sitting down or getting up, position both hands on the armrests.
• After being seated, push back on the seat until the knees are against the frame.
• The Commode may be used over a standard toilet for support and as a toilet riser.
• Remove the bucket and insert the splash guard.
• With the toilet lid up, place the Commode over the toilet. When correctly positioned, the splash guard should be in the toilet bowl.

How to care for 3 in 1 Bedside Commode?

• Clean the commode using basic cleaning/ disinfecting products.
• Do not use abrasive, scouring pads or solvents, including lacquer thinner, turpentine, or acetone.
• Periodically inspect the rubber tips on the legs. If tips are torn or missing, replace them immediately.

Precautions for using Heavy Duty Commode

• Supervision or assistance should be provided for users who are weak or tend to be unbalanced.
• Before each use, ensure that spring buttons protrude all the way through the appropriate holes so they are locked in place.
• Also, confirm that the legs are set securely on the floor and at the same height.
• Test for stability before each use. Do not exceed the user weight capacity of 352 lbs.