Hollister Premier One-Piece Extended Wear Convex Cut-to-fit Transparent 9 Inches Urostomy Pouch

Hollister Premier Extended Wear Urostomy Pouch Features

• Hollister Premier One-Piece Extended Wear Convex Cut-to-fit Transparent 9 Inches Urostomy Pouch rotects the skin over extended wearing time from irritating discharge
• Comes with tape border
• Security and confidence assured with internal non-reflux valves and a drain valve that allows regulation of flow rate
• Plastic belt tabs permit easy attachment of a belt to the pouch for additional security
• Odor-barrier rustle-free film
• Flextend skin barrier is durable and offers high resistance to erosion
• Anti-reflux feature in pouch minimizes backflow of urine
• Soft, beige one-sided ComfortWear pouch panels help provide comfort
• Tap has teardrop indicator
• Choice for urostomies and ileostomies
• ComfortWear pouch panels
  • Transparent - body side only
  • Beige - both sides
• Latex free

When to use Premier One-Piece 9 Inches Urostomy Pouch?

• This product is intended to collect output from stoma (e.g., urostomy) or skin opening (e.g., wound, fistula).

What to buy with Hollister Urostomy Pouch

• Hollister M9 Ostomy Odor Eliminator Spray
• Hollister M9 Odor Cleaner and Decrystallizer
• Hollister Adapt Ostomy Skin Barrier Paste

How to use Hollister Premier Transparent Urostomy Pouch?

1. Gather pouch, disposal bag, tissue and/or cloth for cleaning, and water. Optional: scissors, pen, measuring guide, accessories.
2. Carefully lift an edge of the adhesive and peel downward, gently pushing the skin away from the skin barrier. Properly dispose of used pouch. Do not flush down toilet.
3. Clean the skin with water or with gentle soap as recommended by your healthcare professional. Rinse and dry thoroughly. Do not use oils, powder, lotion, or lotiontype soaps on the skin.
4. Measure the stoma using a stoma measuring guide before every barrier application (if using a pre-sized barrier opening, go to step 6).
5. Trace the determined barrier size opening onto the skin barrier. The skin barrier should fit where the skin and stoma meet. Verify that no skin is showing between the skin barrier and the stoma to help prevent leakage and skin irritation.
6. Using small curved scissors, carefully cut an opening in the skin barrier to match the pattern. Do not cut beyond the line on the release liner. Do not puncture the pouch.
7. Remove the release liner from the skin barrier.
8. Center the skin barrier opening over the stoma.
9. Apply gentle pressure to the skin barrier for about a minute for best adhesion.
10. For tape-bordered barriers, remove the backing paper on both sides and gently press adhesive against skin.
11. Close bottom of pouch. If using a drainable pouch, close the Lock ’n Roll microseal closure at the bottom of the pouch or apply a pouch clamp. Refer to the Lock ’n Roll Microseal Closure Care Tip for more information on how to use this closure system.

If using a urostomy pouch, make sure the drain valve is closed. The teardrop on the drain valve should face the body side of the pouch. If desired, apply the cap provided in the box.

Hollister Premier Ostomy Care Tips
Hollister Premier Urostomy Pouch User Manual