Hollister New Image Soft Convex CeraPlus Skin Barrier

Why choose CeraPlus New Image Soft Convex Skin Barrier?

• CeraPlus skin barrier with soft convex
• Adhesive tape border
• Integrated floating flange
• Not made with natural rubber latex
• The adhesive border may help provide peace of mind
• Increases confidence in patients with skin creases and varying topography
• The floating flange may help allow a secure pouch and barrier coupling without pressing on the abdomen

What to buy with Hollister CeraPlus Skin Barrier

• Tytex Carefix StomaSafe Classic Ostomy Support Garments
• Hollister Adapt Ostomy Barrier Rings
• Hollister M9 Ostomy Odor Eliminator Spray

How to use CeraPlus New Image Soft Convex 2-Piece Skin Barrier?

1. Bring together all supplies needed to clean the stoma and attach the barrier. For cut-to-fit options, you will further need a measuring guide, pen and scissors.
2. Detach the existing barrier by lifting one corner and peeling it away from the skin in a downward motion.
3. Clean the skin with soap and water after.
4. To cut the barrier, first measure the stoma.
5. It should be large enough to cover the stoma only, without skin showing along the edge.
6. Trace the size, based on the measurement guide, onto the barrier.
7. Use a pair of scissors to cut the barrier; however, do not cut beyond the release liner. Then, position the barrier in a diamond arrangement over the stoma.
8. Remove the backing paper from both sides before application.
9. Apply light pressure against the barrier for roughly a minute to secure it to your skin. Once it is secure, connect the barrier’s flange to the pouch’s flange.
10. Then, close the pouch.