Hollister New Image Two-Piece Standard Wear Flat Pre-Cut FlexWear Skin Barrier With Tape Border

Hollister 2-Piece Flat Pre-Cut FlexWear Skin Barrier Features

• Hollister New Image Two-Piece Standard Wear Flat Pre-cut FlexWear Skin Barrier With Tape Border allows for fingers to be put under the flange to help minimize pressure on the abdomen when attaching a pouch
• Color matching system
• Patented pouch-locking mechanism attaches the pouch securely to the skin barrier, preventing unintentional separation
• Tape borders provide additional security to the attachment of the two-piece skin barrier to the skin
• Molds to the body's contours
• Provides excellent adhesion to the skin
• Designed to be used with any New Image drainable, closed, or urostomy pouch with the same flange size
• Latex free
• Color Matching System
  • To help you select compatible New Image components, every box label is color-coded. First, select the proper skin barrier; then select a matching color-coded pouch ("red" skin barrier box label is compatible with "red" pouch box label); Green - 1-3/4" (44mm), Red - 2-1/4" (57mm).
• Pre-sized skin barrier is supplied with an opening that allows the user to apply it without any preparation.

What to buy with New Image Flat Pre-Cut FlexWear Skin Barrier?

• Secure Health Gel-X Absorbent Tablets For Ostomy Pouches
• Hollister Adapt Universal Adhesive Remover Wipes
• Genairex Securi-T Ostomy Deodorant
• Medline Remedy Essentials Barrier Ointment

How to use Hollister New Image 2-Piece Flat Pre-Cut FlexWear Skin Barrier?

• Measure the stoma using a stoma measuring guide before every barrier application
• Trace the determined barrier size opening onto the skin barrier. The skin barrier should fit where the skin and stoma meet. Verify that no skin is showing between the skin barrier and the stoma to help prevent leakage and skin irritation.
• Using small curved scissors, carefully cut an opening in the skin barrier to match the pattern. Do not cut beyond the line on the release liner.
• Remove the release liner from the skin barrier. Set aside with adhesive facing up.
• Close the bottom of the pouch.
• Carefully lift an edge of the adhesive and peel downward, gently pushing the skin away from the skin barrier. Properly dispose of the used pouch and skin barrier. Do not flush down the toilet.
• Clean the skin with water or with gentle soap as recommended by your healthcare professional. Rinse and dry thoroughly. Do not use oils, powder, lotion, or lotion-type soaps on the skin.