Hollister New Image Two-Piece Standard Wear Convex Cut-to-Fit FlexWear Skin Barrier With Tape Border

New Image Two-Piece Cut-to-Fit FlexWear Skin Barrier Features

• Hollister New Image Two-Piece Standard Wear Convex Cut-to-fit FlexWear Skin Barrier With Tape Border provides excellent adhesion to the skin and is designed to be worn for more than one day
• Color matching system
• Skin barrier with integrated beige floating flange
• Floating flange allows fingers to be placed under the flange, to help minimize pressure on the abdomen when attaching a pouch
• Designed to be used with any New Image drainable, closed, or urostomy pouch with the same flange size
• Latex free

What to buy with Hollister 2-Piece Convex FlexWear Skin Barrier?

• Hollister Adapt Ostomy Barrier Rings
• Coloplast Brava Adhesive Remover Spray
• Hollister M9 Odor Eliminator Drops

Benefits of Hollister New Image Two-Piece FlexWear Skin Barrier

• FlexWear (standard wear) Skin Barrier
  FlexWear is a standard-wear, synthetic skin barrier, which is designed to be worn for more than one day. FlexWear barrier is more resistant to breakdown than a SoftFlex skin barrier
• Cut-to-Fit
  Allows the user to cut the skin barrier opening to the size and shape of the stoma
• Floating Flange
  Allows for fingers to be put under the flange for support while attaching the pouch to the barrier
• Integral Convexity
  Skin barriers with integral convexity are indicated for stomas that are flush, recessed, or retracted. These skin barriers are either pre-sized or cut-to-fit
• Tape Border
  Tape borders provide additional security to the attachment of the one-piece pouch or two-piece skin barrier to the skin
• Color Matching System
  To help you select compatible New Image components, every box label is color-coded. First, select the proper skin barrier; then select a matching color-coded pouch (the red skin barrier box label is compatible with the red pouch box label). green - 1-3/4" (44mm) red - 2-1/4" (57mm) blue - 2-3/4" (70mm) yellow - 4" (102mm)

How to Use New Image Two-Piece Convex Cut-to-Fit FlexWear Skin Barrier?

• Measure the stoma using a stoma measuring guide before every barrier application
• Trace the determined barrier size opening onto the skin barrier. The skin barrier should fit where the skin and stoma meet. Verify that no skin is showing between the skin barrier and the stoma to help prevent leakage and skin irritation.
• Using small curved scissors, carefully cut an opening in the skin barrier to match the pattern. Do not cut beyond the line on the release liner.
• Remove the release liner from the skin barrier. Set aside with adhesive facing up.
• Close the bottom of the pouch.
• Carefully lift an edge of the adhesive and peel downward, gently pushing the skin away from the skin barrier. Properly dispose of the used pouch and skin barrier. Do not flush down the toilet.
• Clean the skin with water or with gentle soap as recommended by your healthcare professional. Rinse and dry thoroughly. Do not use oils, powder, lotion, or lotion-type soaps on the skin.