Graham Field Lumex Patient Hydraulic Lift

Lumex Hydraulic Patient Lift Features

• Heavy gauge steel construction
• Six point spreader bar with 360° rotation
• Ergonomic placement of hydraulic pump handle facilitates ease of use
• Disassembles for easy storage
• Maximum weight capacity 400 lb
• Compatible Accessories
• Lumex Two-Point Slings
• Lumex Four-Point Slings
• Lumex Six-Point Slings

Graham Field Lumex Patient Hydraulic Lift User Manual
Graham Field Lumex Patient Hydraulic Lift With Foot Pedal User Manual
 

How to use GF Hydraulic Patient Lift?

Lifting the patient from a bed

1. With the patient's face-up in center of bed, roll them onto their side away from the attendant. 
2. Place sling, folded lengthwise, halfway under the patient with lowered edge just beneath the knees.
3. Next, roll the patient onto their side toward attendant, pull the sling to smooth it, and center the patient on the sling.
4. Pull the leg loops forward and under the thighs. Cross the loops, one through the other.
5. Roll the base of the patient lift under the bed, locating the spreader bar over the patient and be careful not to lower the spreader bar onto the patient.
6. Center the spreader bar over the patient before lifting.
7. Hook the sling loops onto the spreader bar.
8. If the patient is in a hospital bed, raise the head section of the bed to elevate the patient.
9. Raise the patient carefully and if possible, lower the bed. Re-position the patient as needed, using the handle on the back of the sling to ensure a safe and comfortable sitting position as the patient is raised.
10. Raise the patient until the buttocks are just above the mattress. Lift the patients legs and turn the patient to face the lifting column. Move the patient lift away from the bed. Ensure that the patient's arms and legs clear the patient lift, bed, or any other obstacles.

Lowering the patient into bed

1. Raise the patient lift until the patients buttocks are above the surface of the bed. Ensure that there are no obstacles underneath or around the bed. 
2. Move the patient lift under the bed. Make sure the patient does not hit any portion of the bed and that the patients legs have cleared the bed.
3. Center the patient over the bed, and rotate the patient to face the foot section of the bed. Slowly release the pressure knob by turning it counter-clockwise for gradual lowering of the patient or using the hand control pendant. 
4. Carefully lower the patient onto the bed. Support the patients head, if necessary, while being lowered.
5. Remove the sling by reversing the procedures used when lifting patient from bed.

Lifting the patient from the floor

1. Position the patient lift behind the patient, placing a pillow over the base to protect and support the patient's head and neck. Place the patient's head carefully on the base. The patient lift should be positioned with the spreader bar centered over the patient.
2. Lower the spreader bar. Attach the sling to the spreader bar hooks.
3. Lift the patient up above the floor. Position the patient in the sling by pulling the handle on the back of the sling. Turn the patient to face the lifting column, and place the patients feet on the base, straddling the column for extra stability.

Lowering the patient to the floor

1. Place a pillow on the base to protect the patients head and neck (this is unnecessary when using a sling with a head support).
2. Reverse the above procedures to lower.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What to buy with Lumex Hydraulic Patient Lift

• Graham-Field Lumex Replacement Charger Breakaway Cord
• Graham-Field Lumex Spreader Bar Replacement for Bariatric Patient Lift
• Graham-Field Lumex Accessory Storage Bag Replacement for Patient Lift