Graham-Field Lumex HybridLX Rollator Transport Chair

Features of Lumex Rollator Transport Chair

• This Rollator has durable, lightweight aluminum frame that weighs only 22lb
• Easily transforming into a transport chair with removable footrests (adjustable in length) when user needs a short rest
• Easy to assemble without the need for tools and folds effortlessly for convenient transport and storage
• Easy to use handbrakes allow for short and longer period braking when used as rollator and transport chair
• Flexible, soft polyester backrest and 18" wide mesh seat
• Large 8" wheels for easy rolling indoor and outdoor on rough surfaces
• Complete with storage pouch for personal items
• Weight capacity: 300lb
• Graham-Field Lumex HybridLX Rollator Transport Chair User Manual

What to buy with Graham-Field Rollator

• Graham-Field Lumex Tri-Step Cane
• Graham Field FLATMAT Bedside Fall Mat
• Drive Nitro Cup Holder

How to Assemble Lumex HybridLX Rollator?

• Front Wheel Installation:
  1. Remove plastic wrapping from wheel
  2. Insert the wheel into the front frame with the fork pointing toward the back of the rollator. You will hear a click when the wheel has been securely locked into position.
• Front Wheel Removal:
  1. Press the red button
  2. Pull the wheel out from the frame
• Rear Wheel Installation: The rear wheels, which fold down for use, are connected to the rollator frame by the brake cable. To install the rear wheels:
  1. Remove plastic wrapping from wheel
  2. Fold back the wheel with the folding mechanism so that it is fully extended
  3. Lock the wheel in extended position: Insert screw into tubing from inside of frame. Install washer on end of screw outside frame.
  4. Install screw knob on end of screw and tighten by turning knob clockwise. Repeat for other side.
• Seat:
  1. Once the wheels have been securely installed, turn the rollator to upright position
  2. Push down on both the left and right side of the seat to securely lock the seat support bars into place.
     Note: You will hear a click when the seat locks into position.
     Warning: Avoid putting your fingers under the seat support bars when locking the seat into position.
• Handle Height Adjustment:
  1. The HybridLX handle height can be adjusted very easily. To adjust the handle height, press the push button on the side of the rollator and adjust to the best height for the user. Ensure that the push button locks in one of the adjustment holes to secure its position.
  2. Repeat for other side
• Storage Bag: The storage bag is already installed onto the seat support bars. The storage bag can be conveniently removed to place items and then reattached, no tools needed.
• Footrests Installation:
  1. Attach the footrest to the rollator frame by mounting the footrest hinge plates on the rollator hinge pins.
  2. Push the footrest towards the front of the rollator to lock it into position
  3. Ensure that the footrest is locked in place before use. Repeat for other side
     Warning: do not stand on the footplates; this could cause the HybridLX to tip.
• Footrest Length Adjustment:
  1. Press down on the locking button and adjust footplate to the desired length
  2. Repeat for other side. Ensure that the locking buttons are secure in the extension holes to properly lock into position
• Footrest Removal:
  1. Pull on the swing away release lever to release footrest. Footrest will swing outward.
  2. Lift footrest straight up off rollator hinge pins.
• Storage: Footrests can be conveniently stored in the storage bag when not in use. When not in use, footrests can also remain attached to the rollator by simply attaching the lower hinge plates to both lower hinge pins. This will keep the footrest in place and allow the user to move freely.

Storage and Transport of HybridLX Rollator

The HybridLX is designed for easy folding and storage.

• To Fold for transport:
  1. Fold the footplates up
  2. Pull the small handle on the middle of the seat up to release the seat from the seat support bars
  3. Push the handles together; the HybridLX will fold easily and be ready for transport
• To Store:
  1. Adjust the handle height to the lowest position
  2. Pull the small handle on the middle of the seat up to release the seat from the seat support bars
  3. Remove the footrests (if used) from the frame: Pull on the swing away release levers to release the footrests; footrests will swing outward. Lift footrests straight up off rollator hinge pins.
  4. Remove the front wheels: Press the red buttons to release them from the frame
  5. Lay the HybridLX on the floor to fold the rear wheels
  6. Remove the rear wheel locks: Turn the rear lock knobs counterclockwise and remove the screws. Fold rear wheels
  7. It is not required that you remove the storage bag from the HybridLX
  8. Place HybridLX in the Carry Bag, if available
  9. Place front wheels and footrests in the Carry Bag
  10. Close the Carry Bag zipper