EZ-Access Tilt Toilet Incline Lift Features
- Incline Bath Lift unit is lightweight, yet strong and durable
- This lightweight unit, weighing just 34 pounds, can be installed in as little as 15 minutes
- Handles feature non-slip covers, allowing you to maintain a secure grip while the seat raises and lowers
- Available in round and elongated styles and fits bowl heights ranging from 14" to 21"
- Accommodates individuals ranging in height from 5;2" to 6;4" and supports up to 325 pounds
- The unit attaches directly to the bowl and allows the user to move 7-1/2” forward, which positions the shoulders over the feet for optimal balance and positioning
- Additionally, arms remain at an ideal positioning angle, which keeps elbows slightly bent to maximize ideal strength in order to exit the seat
- Assembly is protected by a plastic shield, which can easily be removed for cleaning
- The low angle of the unit allows for easier lateral transfers from mobility devices, transport chairs, etc
- In the down position, the arms are lower than the seat for slide board transfers
- For user and caregiver convenience, the TILT features a hand-held, push button control to operate the lifting process
User Manual of EZ-Access Tilt Toilet Incline Lift
TILT Toilet Incline Lift Technical Specifications
What to buy with TILT Incline Lift
FAQs of EZ-ACCESS Lift
Q. How do I clean the unit?
The plastic shield can easily be removed and cleaned. Refer to the TILT instructions for specific cleaning guidelines.
Q. Can the corded power unit be converted into a battery powered unit?
No, the corded power unit cannot be converted to a battery powered unit and vice versa.
Q. Can this be placed over a bedside commode?
No, it needs to be bolted to a toilet bowl for maximum stability.
Q. Do you have to wait until it is fully extended to sit on it?
No, you can sit on it at any point in its upward or downward movement.
Specification
| Specifications |
TILT Toilet Incline Lift |
Battery Powered TILT Toilet Incline Lift |
| Motor |
120 VACÂ 60Hz |
120 VDC |
| Cycle Time |
Approx. 15-20 seconds to lift/lower |
Approx. 15-20 seconds to lift/lower |
| Weight Capacity |
325 lbs |
325 lbs |
| Dimensions |
24†W x 18†H x 24†D (Approx.) |
24†W x 18†H x 24†D (Approx.) |
| Weight |
34 lbs |
37.5 lbs |
| Electrical |
10' Power Cord |
3' 4" Power Cord | 6' 5" Charging Cord |
| Actuator Mounting |
Left Side Mounting Only |
Left or Right Side Mounting |
| Frame Material / Finish |
Powder Coated Steel |
Powder Coated Steel |
Related Articles
{{x.ShortDescription}} ...
Share
