Enovis Donjoy Isoform LSO Back Brace

Donjoy Isoform LSO Back Support Brace Features

• Low-profile brace for comfortable extended wear
• Offer superior sagittal control and support from T9-S1
• Limited lumbar flexion and extension help restrict movement
• Comfortably fits waist sizes from 28-48” inches and up to 66"
• Targeted compression helps support fatigued muscles that spasm and cause pain
• Adjustable pull tabs help provide targeted compression and help reduce the rotation of the brace

Material Content:

• PVC
• Nylon
• Cotton
• Acrylic
• Polyester
• Polyethylene
• Synthetic Rubber
• Calcium Carbonate

How to use Donjoy Isoform LSO Back Pain Brace?

• Loosen the brace: Loosen the brace by detaching the pull tab from the loop exterior. Pull the brace in opposite directions
• Position the brace: Center the rear section of the belt at the midline of the lower back so that the belt is just above the crease of the buttocks
• Secure the brace: Secure the hook portion of the donning mitt to the loop exterior. (Fig. B) Before tightening the brace, ensure the rear panel section is positioned evenly on both sides. To tighten the brace, slip your thumbs through the holes in the pull tabs and pull the tabs away from your body. Secure the pull tabs to the loop exterior. Adjust the compression as needed.

Cleaning Instructions

• Before cleaning, open the rear panel pouch and detach the waist belt
• Remove the rigid rear panel from the pouch
• To detach the pull tab section, detach the rear panel section by unlooping the waist belt from the lacing guide panel
• Follow the same steps in reverse to put the brace back together after washing
• Hand wash in cold water, less than 86°F (30°C), using mild soap
• Air dry
• Do not iron, tumble dry & bleach

Caution:

• If you experience any pain, swelling, sensation changes, excessive discoloration, irritation to the skin, or any unusual reaction while using this product, consult your medical professional
• If any distortion of the support panels, fraying, or deterioration of lace cables is noticed, discontinue the use
• The brace is intended to be worn over clothing
• The brace should be appropriately sized for the patient to ensure proper support and function
• If the brace does not fit properly, it may be reshaped and adjusted by a healthcare professional. Care should be taken with patients, especially the elderly, not to apply the brace too tightly, which may cause excessive pressure
• Patients should be instructed on appropriate tensioning during ongoing use
• The patient should see a healthcare professional for a replacement if a product quality issue occurs within the warrantied timeframe
• The brace should not be exposed to moisturizers, chemicals, or solvents, as they may affect the durability

Donjoy Isoform LSO Back Pain Brace Instruction Manual