Duralife DuraTilt Tilt-In-Space Adult Shower Chair

DuraTilt Tilt-In-Space Shower Chair Features

• Easy to tilt – simple push-button operation affords three positions to accommodate the needs of individuals
• Tilt-In-Space shower chair facilitates relaxation. It was designed to cradle clients in a reclined position with an open front, padded toilet seat. This enhances the feeling of security and comfort
• Privacy – DuraTilt provides sense of dignity because of seat angle and privacy in toileting
• Note: This product is non-returnable due to hygiene purposes

What to buy with Adult Shower Chair by Duralife

• Duralife Bath Tub Seat With Suction Cups
• Duralife Adjustable Bath Chair
• Duralife Medium Adjustable Bath Chair With Curved Seat And Back

How to use Duralife DuraTilt Adult Shower Chair?

• Position the chair near the patient.
• Engage the brakes on all four casters.
• Push the two lock buttons located at the side of the foot plate and remove for easier transfer.
• Seat the patient in the chair and reattach the footplate.
• Adjust the chair to the desired angle by pulling the quick release pin located behind the backrest.
• Disengage the brakes and move a patient to the desired area.

How to care for DuraTilt Tilt-In-Space Adult Shower Chair?

PVC Pipe cleaning instructions

• Use a soft cloth and wash with soap and water or any nonabrasive cleaner. Disinfectants may be used as required. Use alcohol or acetone on any deep scratches or markings.
• Swing arm chairs are not water tight and disinfectant can be used inside the pipe. Let the solution drain out of the bottom of chair before transporting.

Polyester Fabric cleaning instructions

• Prepare a cleaning solution using 1 tablespoon of liquid dish detergent and 2 tablespoons of household bleach mixed with 1 gallon of water. Use a sponge or soft cloth dampened in the solution.
• Remove the solution with a sponge or soft cloth and clean water. Use a brush in a circular motion to reach crevices. Disinfectants may be used as required. Do not tumble dry.

How to install casters in DuraTilt Tilt-In-Space Shower Chair?

To install casters in shower chair:

1. Turn product upside down on a protected surface.
2. Align caster stem with the hole in the caster socket and tap in with a soft faced hammer. Casters should be lubricated on a routine basis with a silicone lubricant. Hair and any foreign material should be removed from around the axel.
3. Drain holes in the bottom of the caster fittings should be checked for blockage. Insert a small wire in the hole to remove any accumulated debris.