Drive Med-Aire Plus Alternating Pressure and Low Air Loss Mattress System with Defined Perimeter

Drive Medical Low Air Loss Mattress Features

• Drive Med-Aire Plus Alternating Pressure Mattress Replacement System with Low Air Loss includes:
  • Mattress
  • Pump Control unit
  • Mattress Cover
• This combination therapy system provides both alternating pressure and low air loss to optimize pressure redistribution and manage skin maceration
• Cell-on-cell design of 8" deep air cells prevents bottoming out and also provides up to 24 hours of power outage protection
• Advanced Clinical and Care Giver Features: Auto-Firm, Seat Inflate, auto-recovery, microprocessing feedback, lock-out and more
• Digital pump allows for customization to individual patients comfort and safety needs, and will auto return to alternating pressure mode if system is left on static mode for more than 2 hours
• 4-way stretch cover is low shear, fluid-resistant, vapor permeable, quilted and zippered
• Each one of the 20, 8" deep air bladders are easily removed and replaced
• Pillow function maintains the 3 air cells at the head of the bed in static mode for patient comfort
• 3 diagnostic alarms tell you whether a problem is with the mattress or the pump for more efficient servicing
• CPR valve allows for rapid deflation
• EZ Lock/Quick release tubing connector

What to buy with Drive Air Mattress

Medline Blue Tissue/Poly Drape Sheet

Medline Disposable Adult Bib

Invacare Zippered Mattress Cover

 

How to operate the Drive Mattress?

1. Place the pump on a flat surface or suspend the pump on the end of the bed with attached hook
2. Place the mattress on top of the bed mattress. Note foot end
3. Connect air hoses to pump and mattress
4. Check and ensure the air hoses are not kinked or tucked under the mattress
5. Turn pressure to the firm. Plug the power cord into the outlet. Switch on the pump. The green switch will light when the unit is operating
6. Adjust pressure for patient comfort