DreamWear Nasal CPAP Mask With Headgear

DreamWear Nasal CPAP Mask With Headgear Features

• Under-the-nose design: The DreamWear mask is designed to sit under the nose, providing a clear field of vision and minimal contact with the face. This can make the mask more comfortable and less obtrusive than traditional nasal masks
• Soft, silicone frame: The mask frame is made from soft, pliable silicone that conforms to the shape of the head for a comfortable and secure fit
• Flexible nasal cushion: The nasal cushion is designed to gently seal around the nostrils, providing an effective seal without causing discomfort or irritation
• Adjustable headgear: The headgear is fully adjustable, allowing for a customized fit that can be easily adjusted for comfort and effectiveness
• Compatibility with most CPAP machines: The DreamWear mask is compatible with most CPAP machines, making it a versatile option for individuals who may have different machines over time
• Easy to clean and maintain: The mask is designed for easy cleaning and maintenance

Multiple Sizes Available:

• The DreamWear is available in multiple size configurations to better fit a wide range of users
• The frame is available in three sizes: small, medium, and large. Most users will find the medium frame the best fit
• The nasal cushion is available in four sizes: small, medium, medium wide, and large
• The frame and cushion sizes are interchangeable so that any size frame can be used with any size cushion

DreamWear Parts

1. Soft silicone frame: Light, flexible material designed for comfort.
2. Open field of vision: Wear glasses, read, and watch TV.
3. No red marks: Leaves no marks on the bridge of the nose.
4. Innovative: Under-the-nose design.
5. Top-of-head: tube connection Provides freedom of movement throughout the night.
6. In-frame airflow: Unique design allows airflow through the frame to help patients sleep comfortably.
7. Interchangeable cushions: Easily switch between full face, nasal and gel pillows cushions.

 

Frequently Bought Together

• Maril Control III Disinfectant CPAP Cleaning Solution
• Respironics 6 Foot Performance CPAP Tubing
• Respironics Chin Strap For CPAP Mask

How to use DreamWear Mask With Headgear?

• Hold the sizing gauge horizontally under the nose and select the cushion size based on where the outer edge of the nostrils and tip of the nose contact the gauge.
• The cushion opening will be directly under the nostrils. The cushion will hug the nose and leak will be minimal (At no time should the nose be inside the cushion opening. If any part of the cushion overlaps the nose, the cushion is being worn incorrectly)With the mask assembled, place the cushion under the nose.
• Position the frame on the top of the head.
• Pull the headgear over the back of the head.
• To adjust the mask, peel the headgear tabs away from the fabric. Adjust the length of the strap. Press the tabs back against the fabric to reattach (Note: Do not overtighten the headgear).
• Position the mask until it fits comfortably. When finished, the elbow should rest at the top of the head.
• Mask frame sizing.
• The medium (MED) mask frame will comfortably fit most faces.

How to determine the right size?

• Print out this Adobe PDF File at 100%on your printer. Use the print accuracy check at right to ensure printing at the proper size
• Fold the bottom part of this page on the dashed line
• Cut along the dotted line around the fitting gauge
• Place the fitting gauge on your nose
• Determine the appropriate size by which area your nose reaches (S - Small, M - Medium or L - Large)

How to Clean CPAP Mask?

• The parts of the mask excluding headgear should be hand-washed daily using warm water and mild soap.
• Rinse the parts completely and allow them to air dry out of direct sunlight. The headgear should be hand-washed weekly in the same manner

How to Assemble and Disassemble?

Assembly

• Press the mask elbow into the frame until it is completely enclosed in the frame connection
• To connect the cushion, line up the arrow on the front with the arrow on the frame and push the two together until they are clicked into place, then repeat for the opposite side. Ensure the arrow on the cushion matches the arrow on the frame, as the cushion will not function as intended if not properly connected to the frame
• The headgear should be looped through the slots in the frame and fastened to desired tightness. The headgear should be attached so that both the Philips Respironics and DreamWear logos face outward

Disassembly

• The cushion can be removed by pulling the ends away from the frame
• Similarly, the mask elbow can be removed by simply pulling it out of the frame
• The headgear is removed by releasing the hook and loop fasteners and then removing it from the headgear slots of the frame
• If the frame wraps are installed, they can be removed by releasing the hook and loop fasteners

DreamWear Nasal CPAP Mask With FitPack User Guide
Dreamwear CPAP Mask Sizing Guide