DonJoy IceMan CLEAR3 Cold Therapy Unit With Ankle Pad

IceMan CLEAR3 Cold Therapy Unit Features

• DonJoy IceMan CLEAR3 Cold Therapy Unit With Ankle Pad is developed through direct customer interaction and feedback
• Time tested with over 15 years of experience delivering cold therapy solutions
• Patented semi-close loop recirculation system delivers consistent cold therapy throughout the cold pad, eliminating freezing inlet temperatures
• Clear cooler design for easy refill indication
• Self-priming, plug n’ play operation
• Designed for easy portability and storage
• A complete line of cold pads to deliver the cold therapy to where it is needed the most

Note: This item is non-returnable due to hygiene purposes.

DonJoy IceMan Operating Instructions

How to use DonJoy IceMan CLEAR3 Cold Therapy?

Post Surgery Application

1. Add ice to the level indicated inside the unit then add 2 quarts or 2 liters of water.
2. Apply the site specific pad over the incisional area. There should be a thin layer of dressing between the pad and the skin.
3. Place a layer of cast padding, 1/2” to 1”, over the cooling pad. Utilize an elastic wrap under medium tension, wrap the cooling pad until pad and padding is covered. make sure the ends of the hose extend out from under the wrap.
4. Connect the cooling pad to the hose extending from the cooler, making sure the connectors snap into place tightly together (listen for audible click).
5. Plug power supply into the wall.
6. Connect the power supply cord provided with the unit to the connector located on the front of the cooler. This will immediately start the motorized pump.
   WARNING: use only the power supply that came with this unit. DonJoy P/N 13-4882-0-00000. Failure to do this could damage the pump, the power supply or both.
7. Adjust temperature control on the hand console starting at the blue dot (allow 10 minutes for temperature to stabilize) and adjust to temperature prescribed by physician.
8. When ice has melted, refill with ice and water. (Make sure device is unplugged during refilling procedure.)

Chronic or Post/Injury Application

1. Add ice to the level indicated inside the unit then add 2 quarts or 2 liters of water.
2. Apply the site specific pad to the area to be treated. Pad should be applied over a thin layer of gauze or stockinette. Do not apply cooling pad directly to the skin.
3. Connect the cooling pad to the hose extending from the cooler, making sure the connectors snap into place tightly together (listen for audible click).
4. Plug power supply into the wall.
5. Connect the power supply cord provided with the unit to the connector located on the front of the cooler. This will immediately start the motorized pump.
   WARNING: use only the power supply that came with this unit. DonJoy P/N 13-4882-0-00000. Failure to do this could damage the pump, the power supply or both.
6. Adjust temperature control on the hand console starting at the blue dot (allow 10 minutes for temperature to stabilize) and adjust to temperature prescribed by physician.
7. When ice has melted, refill with ice and water. (Make sure device is unplugged during refilling procedure.)

How does IceMan CLEAR3 Cold Therapy Unit Work?

ICEMAN with dual pump recirculation technology. The DonJoy IceMan features a patented recirculation system that allows water warmed after flowing through the cold pad to be preserved and remixed with cooler ice water at a constant flow rate, providing consistent cool water distribution throughout the cold pad.

COMPETITORS Other versions restrict or pinch water flow to the cold pad, causing variable flow rates and inconsistent cold pad temperatures.

Warning

• This device can be cold enough to cause serious injury.
• Read and understand all warnings and instructions for use before using this device.
• Additional warnings appear in the instructions for use.