ConvaTec Esteem Plus One-Piece Extended Wear Opaque Moldable Drainable Pouch

ConvaTec Esteem Plus One-Piece Ostomy Pouch Features

• ConvaTec Esteem One-Piece Drainable Pouch has stomahesive skin barrier
• Comes with 2-sided comfort panel, InvisiClose tail closure and filter
• Pouch size: 12"

What to buy with ConvaTec Esteem 1-Piece Moldable Drainable Pouch

• ConvaTec Eakin Cohesive Ostomy Seal
• ConvaTec Ease Thin Curve Strips
• ConvaTec Stomahesive Paste
• ConvaTec Stomahesive Protective Powder

How to use Esteem One-Piece Ostomy Bag?

• Moldable Disc Application
  1. Moldable disc and pouch come attached
  2. Remove moldable disc from the pouch
  3. Remove liner marked 1. This is the molding side.
  4. Roll and mold the disc to the size of the stoma. Do not stretch, pull or cut.
  5. Pinch into place once desired size is reached.
  6. Check the size of the molding.
  7. Remove liner marked 2. This side will go on the skin.
  8. Place the disc on the body. Push the roll of adhesive toward the stoma to ensure a close fit. Skin should be clean and dry
  9. Remove liner marked 3.Separate the sides of the pouch to allow some air to enter the pouch
• Applying Pouch to the Moldable Disc
  1. Remove pouch release liner
  2. Place pouch on the moldable disc
  3. Smooth/hold skin barrier in place for about 30 seconds
• InvisiClose Tail Closure
  1. To close the pouch, fold the end up towards you 3 times until interlocking closures line up. Keep a small amount of air in the pouch.
  2. Press and pinch across the entire closure to secure
  3. For added discretion, turn the Lock-it-Pocket inside-out to hide tail inside

• Emptying and Removing Drainable Pouch
  1. To empty pouch, tilt tail up towards the body. Peel open the closure and unravel tail
  2. For easier opening, push sides together.When its time to change pouch, (either drainable or closed-end) the disc and pouch can be removed as one

User manual for ConvaTec Esteem Plus One-Piece Moldable Drainable Pouch