Big John Toilet Support

Features

• Big John Toilet Support maintains the cleaning ability of a wall mounted fixture
• Leg made of high impact ABS, with the carriage and foot made of a chemical and stain resistant flexible PVC that forms to the contour of the toilet
• Perfect for hospitals, nursing homes, government facilities, stadiums, airports, theaters, office buildings and virtually every wall mounted toilet
• Meets surgical review center of excellence requirements
• Increases weight capacity from 350lb to over 1000lb
• Simple to install
•  

More Information

• Installation Instructions:
  - For toilets that have a raised section at the bottom of the toilet bowl, remove the enclosed insert to allow for a tight fit
  - For toilets that do not have a raised section at the bottom of the toilet bowl, put the insert into the grooves on the carriage
  - Remove liner from adhesive tape on the top of the carriage and place the Toilet Support in position under the toilet bowl
  - Do not caulk the top of the carriage. Make sure bottom of toilet is clean before installing
  - With the Toilet Support under the bowl unscrew the leg to tighten it snugly against the floor
  - Do not overtighten
  - Make sure the Toilet Support is mounted straight and that it is centered under the toilet
  - Wipe around the entire carriage and toilet where they meet, with the enclosed alcohol wipes, to remove any dirt
  - Apply a bead of the enclosed caulk around the entire Toilet Support carriage where it meets the toilet. Make sure to fill in all gaps
  - Wipe off any excess with a damp cloth. Allow it to cure for 24 hours
  - Once caulk has cured, leg can be raised to clean underneath it. Re-lower the leg after cleaning, making sure that it fits snugly