Summit LSO 637 Lumbar Support Brace Features
- Sure Slot System: Unique sizing mechanism allows for quick and easy sizing adjustments, without the use of tools.
- Rigid Side Panels: Provides increased lateral control for patients in need of additional support.
- Reliable Structural Integrity: Tri-band technology system and integrated vertical stays help ensure effective compression and flexibility.
- Integrated Anterior Panels:Anterior panels at each end of the brace overlap to provide added midline support.
- Aspen's innovative FlexTabs: These panels disperse pressure and naturally conform to each patient's anatomy to help increase comfort.
How to use Summit 637 Back Brace?
1. Preparation
Place the pull tabs 2 inches from the plastic in the back of the Summit. Pull the ends of the Summit away from each other ensuring that it is fully extended.
2. Placement
- Center over your lower back and apply the brace tightly around the abdomen, the right side overlapping the left.
![Aspen 637 LSO Aspen Summit Brace](https://static.webareacontrol.com/OptimizeCommonImage/41020212756Untitled_design_(10)-gen.png)
- When applied properly, the Summit Logo will be visible. (The rigid anterior panels do not need to align perfectly in front of the brace.)
![Aspen 637 LSO Aspen Summit Brace](https://static.webareacontrol.com/OptimizeCommonImage/4102021331Untitled_design_(11)-gen.png)
3. Angling Ends
- For patients with a larger hip to waist ratio, the ends of the Summit should meet at a downward angle to fit properly and limit migration.
- For patients with pendulous abdomens, the ends of the Summit should meet at an upward angle to fit properly and limit migration.
4. Tightening
- Slip your thumbs through the holes in the pull tabs. Pull away from your body.
- The right pull tab controls the upper compression and the left pull tab controls the lower compression. Adjust the compression as needed.
- When tightened, secure the pull tabs to the hook-and-loop in front of the brace.
5. Adjustment
Adjust the upper and/or lower compression by loosening or tightening the pull tabs as needed.
Aspen Lumbar Support LSO 637 Precautions & Care Instructions
Precautions
- Read instructions before use. Proper training in the use of this device should take place before it is applied. These directions are guidelines only and are not offered as medical recommendations.
- If you suffer from a serious medical condition, we strongly suggest that you consult with a licensed health care professional before using this product.
- Proper fitting is required for this product to be effective. Under some circumstances, this product may be prescribed by a physician.
- Please see the limited warranty for further information.
Care Instructions
- Hand wash only at 30° C
- Wash with mild detergent.
- Air dry
- Do not use bleach or other chemicals.
- This abdominal binder is not made with Natural Rubber Latex.
- Materials: Nylon, Polyester, HDPE, PVC, Polyurethane, and UHMWPE
- Disposal: Product may be safely disposed in accordance with local laws.
Summit 637 LSO Manual
Aspen One Size Adjustable Brace Manual
What to buy with Aspen Lumbar Support
Aspen Lumbar Brace FAQ
1. How do I clean the brace?
- Use a mild soap and water to clean the brace by hand.
- Rinse thoroughly and pat out any excessive moisture.
- Allow to air dry completely.
- Do not use bleach, harsh chemicals or machine wash/dry.
2. Can I wear the brace under my clothing?
Yes, Aspen Summit Brace can be worn underneath clothing, but an undershirt is recommended next to skin for enhanced comfort.
Aspen Summit 637 Back Brace Specification
Size |
Waist Length |
Small |
26" - 34" (66cm to 86cm) |
Medium |
33" – 42" (84cm to 107cm) |
Large |
41" – 51" (104cm to 130cm) |
X-Large |
50" – 60" (127cm to 152cm) |
One Size Adjustable |
28" - 54" (71cm to 137cm) |
Aspen Summit 637 Warranty
Limited Warranty
Related Articles
{{x.ShortDescription}} ...
Share