Fisher & Paykel Brevida CPAP Nasal Pillow Mask With Headgear

Features

• Fisher & Paykel Brevida Nasal Pillow CPAP Mask with Headgear includes:
  - Mask frame
  - 2 AirPillow sizes (XS/S & M/L)
  - Headgear
  - Headgear Clips
  - Mask tube with Swivel
  - 2 mask diffusers
• Simple headgear to deliver an individual fit and is designed to stay in place during sleep
• Innovative AirPillow seal inflates to form a gentle pillow of air and seals in and around the nose
• Diffuser, which reduces noise and air draft, is washable and durable
• VisiBlue highlights incorporated into the mask key components assist patients with daily mask use
• Short Tube with swivel

More Information

• Operating Instructions:
  - The operating pressure range of your mask is 4 to 25 cmH2 O.
  - The operating temperature range of your mask is 5 to 40 °C (41 to 104 °F).
  - Before using your mask each time, you should:
  a) Inspect it for damage or deterioration. If there is any visible deterioration (cracking, tears, etc), do not use your mask and seek replacement part(s) from your healthcare provider.
  b) Inspect the exhaust holes on the Elbow . Ensure air is flowing through these holes and do not use if blocked.
  c) Make sure path of air in mask is free from objects that may prevent breathing.
  NOTE: Failure to follow the operating instructions above may compromise the performance and safety of the mask.
• Fitting Your Mask:
  - Hold the Silicone Seal away from your nose, use your fingers to carefully spread open the soft side wings of your Silicone Seal and then guide the two openings into your nostrils.
  - Hold the Mask Frame in position with one hand and pull the Headgear over your head with the other hand, positioning the straps above the ears as per the fitting images.
  - Gently tighten or loosen the Headgear straps on the sides of the Headgear until you achieve a comfortable seal.
• Cleaning your Mask at Home:
  Wash your Mask (excluding the Headgear and Diffuser ) after each use:
  - Hand-wash your mask in soap dissolved in lukewarm water. Do not soak for more than 10 minutes.
  - Rinse thoroughly with fresh water, ensuring that all soap residue has been removed.
  - Inspect all parts to ensure they are visually clean. If necessary, repeat the cleaning steps until all parts are visually clean.
  - Leave all parts to dry out of direct sunlight before reassembling.
• Wash your Headgear and Diffuser cover after 7 days of use:
  - Hand-wash your Headgear in soap dissolved in lukewarm water. Do not soak your Headgear for more than 10 minutes.
  - Gently hand wash the Diffuser in soap dissolved in lukewarm water, avoid scrubbing the material. Do not soak for more than 10 minutes.
  - Rinse thoroughly with fresh water, ensuring that all soap residue has been removed.
  - Inspect all parts to ensure they are visually clean. If necessary, repeat the cleaning steps until all parts are visually clean.
  - Leave all parts to dry out of direct sunlight before reassembling.
• Cleaning Cautions:
  - Do not clean your mask with products containing alcohol, anti-bacterial agents, antiseptic, bleach, chlorine or moisturizer.
  - Do not clean your mask in a dishwasher.
  - Do not store your mask in direct sunlight. The above actions may deteriorate or damage the mask and shorten its life. If there is any visible deterioration do not use your mask and seek replacement part(s).