One of the most concerning and daunting elements of patient care during the day and at night may be patient falls. Yet, falls are also preventable. HPFY's complete Fall Prevention Alarms are specifically designed to prevent falls, reduce the risk of injury, and enhance patients' overall safety all day, every day. Count on HPFY for everything you need for a complete Fall Management Program.

Types of Bed Alarms for Fall Prevention

We offer simple to full-featured signal devices that quickly warn caregivers when patients leave their beds, chairs, or rooms.

Bed Monitor: This device provides both an alarm at the nursing station console and a volume-controlled in-room alarm that can be silenced if needed. It consists of a control unit mounted on the headboard of the bed and a pressure-sensitive panel that measures variable resistance.
Chair Monitor: This is a battery-operated portable monitor with an audible exit alarm, including a one-year reusable chair sensor pad. The sensor pad is mounted on the chair's seat. After that, the resident is seated, and the computer is turned on. When the resident wants to leave the chair, the monitor sounds an audible warning and wirelessly sends the incident data to the nursing station and the staff notification system.
Floor Mat Fall Monitor: When weight is put on the floor mat fall alarms, weight-sensing floor mats signal a fall alarm. For as little as one and a half pounds of pressure, the floor mat signals the fall alarm. On the side of the bed or in a doorway, the Floor Mat Alarm can be mounted to warn the caregiver when a resident arises or tries to leave. The warning information is then transmitted wirelessly and cautiously to the console.
Motion Detector: A small passive infrared (PIR) transmitter that senses the patient when they get out of bed and immediately sends a “Bed Exit” alert to nursing staff.

Factors to Consider Before Purchasing Fall Alarms

While fall prevention alarms can be very useful devices for both the caregiver and the patient, knowing the most suitable alarm can be confusing. Should you buy a pressure sensor mat alarm, or should you opt for a passive infrared sensor (PIR) alarm instead? Is a pull-cord sensor alarm better suited to your requirements?
Before deciding on a bed alarm for the elderly, you should first consider some of these important buying factors:

Wired or Wireless:
- While wired bed alarms are typically the most cost-effective alternative, there are some drawbacks to them. One big downside is that they need to be put in the same space as the patient. It may prove distressing and could startle them if the alarm goes off. Another downside is that the consumer is more likely to trip over the cords, particularly if they get up in a dark bedroom in the middle of the night.
- However, with wired bed alarms, the alarm can be kept in the same bedroom as the caregiver, so they are less likely to miss any warnings. It also ensures that unexpected noisy sounds will not be inconvenient to the patient. The caregiver can also use the alarm in the home to track their loved one from wherever they are and not be confined to only one room.
Range:
- The operational range is an important aspect to remember if you're thinking of opting for a wireless bed alarm. The range will determine how far the remote receiver can be used from the actual bed alarm. Depending on the model, the range of a wireless bed alarm can be anywhere from 150 ft-400 ft.
- If you plan to use the receiver in other areas of the home, choose one with a longer range so that you can track the patient wherever you are.
Alert and Volume Control
- Many bed alarms emit an audible alert, and some can vibrate and/or flash as well.
- The audible warning should be loud enough so that the caregiver can hear it without causing the patient undue distress. Make sure you select one with a volume control to change the sound intensity as required. This is especially important if the patient suffers from dementia, as they may be overwhelmed by loud noises, which can be distressing.
Power Source
- Batteries power most bed alarms. However, some versions can also be operated by an optional AC adapter.
- It is better to have a bed alarm for elderly people that is powered by both batteries and AC adapters than one that is powered exclusively by batteries. This will ensure that the alarm is still working if needed, and the unit will be able to run off batteries in case of a power failure.
Fabric Type
- If you're looking for a pressure mat alarm, select one that is both waterproof and easy to clean. The preferred material used for pressure mats is vinyl, which is durable and fluffy, making it easy for the user to lie on. Many mats also have an antimicrobial coating that is ideal for those suffering from incontinence, as it can help prevent the spread of germs and infections.

Where to buy Fall Prevention Alarms Online?

HPFY carries a wide range of fall alarms that will meet all your fall prevention needs. There are chair alarms, floor mats, motion detectors, and bed alarms for elderly from leading manufacturers such as Skil Care Corp, Smart Caregiver Corporation, Proactive Medical, and more.