Graham Field Bath Seat Basket

Features of Graham Field Bath Seat Basket

• Rust Resistant
• Easily attaches to the front of bath seat frames
• Fits standard-size bath seats with 7/8" or 1" tubing
• Packaged in retail hang card
• Size: 12" x 4" x 4"

What to buy with Bath Chair Accessories

• Long Handle Sponge
• Adjustable Height Bath Step
• Graham Field Lumex Flange Tips

How to mount the basket?

1. Mount one clamp on each front leg at the same height with hooks facing inward and clamps facing the rear as shown at the right in Install Clamps.
2. Install nuts in clamp recesses.
3. Install washers on appropriate screws: use short screws if you are mounting the clamp above the leg joint, as shown in these instructions, or long screws if you are mounting the clamp below the leg joint.
4. Insert screws through clamps into nuts as shown at right in Fasten Clamp.
5. Use a Phillips Screwdriver to tighten it as shown at right in the Fasten Clamp. Do not over-tighten.
6. Mount basket on clamp hooks, as shown at right in Basket, Mounted on Clamp Hooks. Ensure the basket is securely mounted on both hooks as shown before use.

How to clean and maintain a Bath Seat Basket?

• To clean the basket, use a clean, soft cloth dampened with a mild soap and water solution, rinse with clear water, then dry with a soft cloth.
• Check basket and mounting hardware periodically for corrosion and wear, and replace if found.